Deuchainn àireamh ASTM D613, FDR-3622 Cetane

Diesel cetane tester in accordance with ASTM D613, GB / T386 and other standards with fixed ignition lag determination cetane number of diesel and biodiesel, this product is suitable for the ignition quality of diesel fuel sample with a known cetane number The standard fuel (cetane and heptamethyl nonane certain volume mixture) comparing the ignition properties determined.

RANNSACHAIDH

Sònrachadh
Buannachd farpaiseach

Tuairisgeul:
The specific method is to change the compression ratio of the engine cylinder, in order to obtain the determined ignition lag (delay) period, that the fuel injection start and combustion (combustion) time interval between the start. Whether the sample or the standard fuel in the combustion process, this time interval should be fixed at 20 degrees (the generator crank angle count), but with different fuels at different compression ratios required for combustion, that is, the end of the compression stroke, temperature and pressure differences. According to the compression ratio of the sample gas gauge reading select no more than two standard fuel cetane number five units, obtained in the same manner to determine the ignition lag. When the sample is compressed between the gas gauge reading in more than two standard fuel gas gauge reading, the cetane number is calculated by interpolation of the sample, the symbol ××. × / CN. For example, 45.6 / CN.

Tagraidhean:
1. ASTM D 613
2. Dìosail
3. Petroleum, cumhachd, ceimigeach, rannsachadh, smachd càileachd agus oilthigh

Sònrachaidhean:

teicnigeach Chrìochan
Seòrsa einnsean	Single cylinder, horizontal, water-cooled, four-stroke standard hair
The engine cylinder diameter (mm)	90
The engine cylinder stroke (mm)	90
Engine piston displacement (L)	0.573
Engine cylinder compression ratio	5 gu 21
Astar einnsean	1000r / mion
Fuarachadh einnsean	Closed water cooling
Engine toiseach	Toiseach dealain
Ola einnsein	L-ECC Diesel oil 20W / 40 (GB11122-89)
Engine rotation (flywheel end view)	Frith-deiseal

feartan	1.Professional knock sensor signal FDT-DS uses the industry standard design, more stable and reliable
	2.Configure a special Friends knock detection system, to ensure zero knock signal, magnification, broadening adjust stability
	3.The configuration FAD security system for emergency protection under abnormal conditions, protect the safety of operating personnel

All Categories

Products

CUIR FIOS THUGAINN

Deuchainn àireamh ASTM D613, FDR-3622 Cetane

Fios

bathar Co-cheangailte

Fios

Cuiribh fios thugainn