ASTM D2274 FDR-0403 Distillate fuel oil oxidation stability tester (acceleration method)

Distillate fuel oil oxidation stability tester (acceleration method) according to SH/T0175, ASTM D2274 and other standards to determine the initial distillation point is not lower than 175 ℃, 90% point of the distillate temperature is not higher than 370℃ of the middle distillate fuel oil Inherent stability performance. That is, the ability of the sample to resist exposure to the atmosphere in the absence of environmental factors such as water or active metal surfaces and dirt.

INQUIRY

Spesifikasyon
konpetitif Advantage

Aplikasyon:
1. SH/T0175, ASTM D2274
2. Distillate fuel oil
3. 2.Petroleum, power, chemical, research, quality control and university

Espesifikasyon:

Paramèt teknik
Detection unit	Six units, water and gas independent control, improve efficiency
Constant temperature bath:	Metal bath system, clean and environmentally friendly
Presizyon kontwòl tanperati	Tanperati chanm -100 ± 0.1 ° C
Montre mòd	LCD ekspozisyon
Sistèm distribisyon	Automatic timing, automatic voice prompts

karakteristik	1.The measuring instrument adopts liquid crystal display and Chinese/English operation interface.
	2.Six sets of units are used to independently control the circulating water and gas source systems.
	3.Using automatic timing system, when the system alarm prompts.
	4.The black box allows the oxidation tube after the test to be directly placed therein and cooled at room temperature.

tout Kategori

pwodwi yo

KONTAKTE NOU

ASTM D2274 FDR-0403 Distillate fuel oil oxidation stability tester (acceleration method)

Kontakte nou

Ki gen rapò pwodwi

Kontakte nou

Jwenn an kontak