ASTM D93 FDT-0201, Louvri pwen flash gode ak tèsteur pwen dife

Non Brand:

Zanmi

Nimewo Modèl:

FDT-0201

sètifikasyon:

CE, ISO, CO

Prix:

USD600-2000

Anbalaj Detay:

Katon difisil, anbalaj ekspòtasyon estanda

Tan livrezon: (LIDER)

30 JOU

Peman Terms:

T / T, L / C

Bay Abilite:

50SET/MWA

Pouvwa materyèl

AC 220V ± 10%, 50Hz

Aparèy chofaj la

Heating power from 0 ~ 600W continuously adjustable

Sample heating rate

1 ~ 12 ℃ / min, it can be controlled.

Electric mixing device

(1) 90 ~ 120 r / min for the test step A.

(2) 250 ± 10 rev / min for the test step B.

Standard oil cup

(1) Diameter: 50.7 ~ 50.8 mm.

(2) Depth: 55.7 ~ 56.0 mm.

(3) Test oil capacity groove depth: 33.9 ~ 34.3 mm.

(4) Test oil capacity: about 70 ml.

Tèmomèt

A bar mercury thermometer, in line with GB / T 261-2008 standards.

(1) temperature range -5 ~ 110 ℃, indexing 0.5 ℃.

(2) temperature range of 20 ~ 150 ℃, indexing 1.0 ℃.

(3) temperature range of 90 ~ 370 ℃, dividing 2 ℃.

Ignisyon

(1) ignition sources: gas (or other civilian combustible gas, the same below). (2) pilot aperture: 0.8 mm.

Tanperati anbyen:

≤35 ℃.

Imidite relatif

≤85%.

Total pouvwa konsomasyon

Mwens pase 650W.

Karakteristik

1. the instrument is designed in full compliance with ASTM D93, GB/T261 standards.

2. heating power continuously, stepless adjustable, voltmeter intuitive display power size, advanced, reasonable temperature control.

3. compact structure, stainless steel countertops, easy to clean oil.

4. easy to operate, the test results are accurate, the instrument was a number of measurement units selected as closed flash point detection equipment.