ASTM D611 FDH-2111 Petroleum products aniline point tester

Estanda aplikab: ISO 2977, GB / T262, ASTM D611, IP2
This instrument applies to the determination of petroleum products aniline point test method is specified aniline and sample volume placed in a test tube, and mechanical stirring to mix. The mixture is heated at a controlled rate until completely mixed the two phases. The mixture was then cooled at a controlled rate, when the two-phase separation, the temperature is recorded aniline point.

INQUIRY

Spesifikasyon
konpetitif Advantage

Kote li soti:	Changsha, Lachin
Non Brand:	Zanmi
Nimewo Modèl:	FDH-2111
sètifikasyon:	ISO, CE, CO

Minimòm Lòd Kantite:	1 Set
Prix:	2000 ~ 4000 $
Anbalaj Detay:	Katon difisil, anbalaj ekspòtasyon estanda
Tan livrezon:	30 jou

Aplikasyon:
1. ASTM D611
2. LUBRICANT LWIL, lwil motè
3. Petwòl, pouvwa, chimik, rechèch, kontwòl kalite ak inivèsite

Espesifikasyon:

Paramèt teknik
Chauffage	Tib chofaj elektrik
The mixing method	Flexible shaft stirring
Metòd deteksyon an	Photoelectric detection
Ranje Mezi	Tanperati chanm ~ 150 ℃
Pouvwa materyèl	AC220V 50HZ
Ajisteman tanperati	A solid state voltage regulator
Nòm	ASTM D611, IP2, ISO2977, GB/T262
karakteristik	1. the photodetector separated state accurate; 2. high-power solid-state regulator control heating rate; 3. the voltage is raised status display; 4. integrated structure, easy to operate; 5. standard glass test tubes, meet the standard requirements;

tout Kategori

pwodwi yo

KONTAKTE NOU

ASTM D611 FDH-2111 Petroleum products aniline point tester

Kontakte nou

Ki gen rapò pwodwi

Kontakte nou

Jwenn an kontak