ASTM D323 FDR-0202 Saturated vapor pressure tester (Reid method)

Saturation vapor pressure of petroleum products in accordance with applicable standards ADTM D323,GB / T8017-2012 «Determination of vapor pressure of petroleum products (Reid method)» provisions measuring gasoline, volatile vapor pressure of the volatile crude oil and other petroleum products. But not for the determination of the vapor pressure of liquefied petroleum gas. Sample at 37.8 ℃ saturated vapor pressure measuring device with Reid formula measured maximum vapor pressure. Reid called the saturated vapor pressure.

NCHỌPỤTA

nkọwapụta
asọmpi Advantage

ngwa:
1. ISO3007,ASTMD323,IP692.
2. Petroleum, ike, kemịkalụ, nyocha, njikwa mma na mahadum

nkọwa:

Nka na ụzụ kwa
Water bath heating power	1600W
Water bath temperature range	Okpomọkụ ụlọ ~ 90 ℃
Water bath temperature control accuracy	± 0.1 ℃
Gauge accuracy	± 0.4%
ihere okpomọkụ	-10 ℃ ~ 35 ℃
ikwu iru mmiri	≤85%
ike oriri	Ihe na-erughị 1700W
ike ọkọnọ	AC220V ± 10%, 50Hz

atụmatụ	1.Mainly composed of water bath and temperature control devices, bomb vapor pressure gauges and other components. With the use of flexible, mobile, and convenient.
	2.Water bath is filled with insulating material laminated cooler, installed in the main bath shop electric heater and electric stirring device, the bath temperature was maintained 37.8 ℃ ± 0.1 ℃, above the bath bomb fitted stent placement test, one can put two only test bombs
	3.Temperature control device: temperature control accuracy of 37.8 ± 0.1 ℃, digital display, installed in the electrical box on the left
	4.The pressure gauge: the test Reid vapor pressure under different pressures, the instrument is equipped with a variety of standard gauge a set range.

All Categories

ngwaahịa

KPỌTỤRỤ ANYỊ

ASTM D323 FDR-0202 Saturated vapor pressure tester (Reid method)

Kpọtụrụ Anyị

njikọ Product

Kpọtụrụ Anyị

Esi na aka