מוצרים -
צור קשר
סל קרח
טל ': 86-0731-83889629
האספסוף: 86 13548954520
דואר אלקטרוני: [מוגן בדוא"ל]
סקייפ: changshafriend.tester
Whatsapp: 86 13548954520
ASTM D5293 FDH-1401 Automatic engine oil apparent viscosity analyzer (COLD CRANK SIMULATOR-CCS)
Applicable standards: GB / T6538 ASTM D5293.
The instrument can be used to test the engine oil at low temperature dynamic viscosity index, which uses a contemporary advanced technology, set of mechanical, optical electronics and computer technology in one, it can measure and control the temperature. Temperature control is accurate and stable.
Reasonable structure, stable performance, simple operation, it is the ideal analysis and testing equipment.
- מִפרָט
- יתרון תחרותי
מקום מוצא: | צ'אנגשה, סין |
שם המותג: | חָבֵר |
מספר דגם: | FDH-1401 |
הסמכה: | ISO,CE,CO |
כמות מינימום הזמנה: | 1 הגדר |
מחיר: | 10000~15000$ |
פרטי אריזה: | קרטון קשיח, אריזת יצוא סטנדרטית |
זמן משלוח: | ימי 30 |
תנאי תשלום: | TT, L / C |
אספקת יכולת: | ערכות 50 / חודש |
יישומים:
1. ASTM D5293
2. LUBRICANT OIL
3. נפט, חשמל, כימיקלים, מחקר, בקרת איכות ואוניברסיטה
פירוט מוצר:
פרמטרים טכניים | |
מצב קירור | Imported compressor refrigeration |
טווח טמפרטורות | Room temperature ~ -35 ± 0.1 ℃ |
Circular way | Imported low temperature cycle pump drive |
The temperature control | Temperature control system microcontroller |
The drive motor | Imported motor |
לְהַצִיג | LCD |
The correction method | Standard Oil Correction |
ספק כוח | AC220V ± 10% 50HZ |
תכונות
| 1. תצוגת מסך LCD 2. the instrument is equipped with automatic diagnosis system, automatic fault prompt function 3. the instrument uses the speed control system and import drive motor of Friend Brand, it is to a large extent stabilize the drive current stability and precise control of the motor speed, it makes the results more accurate 4. the instrument control system is equipped with automatic calibration speed system, automatic calibration viscosity system, automatic calibration function curve system 5. the instrument uses a smart operating system, the user only a key operation, the instrument automatically heat up, automatic timing, automatic calculation, automatic temperature, automatically save the results, automatically print the report |