ASTM D613,FDR-3622 Cetane number tester

Diesel cetane tester in accordance with ASTM D613, GB / T386 and other standards with fixed ignition lag determination cetane number of diesel and biodiesel, this product is suitable for the ignition quality of diesel fuel sample with a known cetane number The standard fuel (cetane and heptamethyl nonane certain volume mixture) comparing the ignition properties determined.

Ëmfro

bestëmmen
Kompetitiv Virdeel

description:
The specific method is to change the compression ratio of the engine cylinder, in order to obtain the determined ignition lag (delay) period, that the fuel injection start and combustion (combustion) time interval between the start. Whether the sample or the standard fuel in the combustion process, this time interval should be fixed at 20 degrees (the generator crank angle count), but with different fuels at different compression ratios required for combustion, that is, the end of the compression stroke, temperature and pressure differences. According to the compression ratio of the sample gas gauge reading select no more than two standard fuel cetane number five units, obtained in the same manner to determine the ignition lag. When the sample is compressed between the gas gauge reading in more than two standard fuel gas gauge reading, the cetane number is calculated by interpolation of the sample, the symbol ××. × / CN. For example, 45.6 / CN.

Dossieren:
1. ASTM D 613
2. Diesel
3. Petroleum, Kraaft, Chemikalien, Fuerschung, Qualitéitskontroll an Universitéit

definéiert:

technesch Parameter
Motortyp	Single cylinder, horizontal, water-cooled, four-stroke standard hair
The engine cylinder diameter (mm)	90
The engine cylinder stroke (mm)	90
Engine piston displacement (L)	0.573
Engine cylinder compression ratio	5 zu 21
Motor Geschwindegkeet	1000 U / min
Motor Cooling	Closed water cooling
Motor starten	Elektresch Start
Motor Ueleg	L-ECC Diesel oil 20W / 40 (GB11122-89)
Engine rotation (flywheel end view)	Géint de Auer

Eegeschaften	1.Professional knock sensor signal FDT-DS uses the industry standard design, more stable and reliable
	2.Configure a special Friends knock detection system, to ensure zero knock signal, magnification, broadening adjust stability
	3.The configuration FAD security system for emergency protection under abnormal conditions, protect the safety of operating personnel

all Kategorie

Produkter

KONTAKTÉIERT EIS

ASTM D613,FDR-3622 Cetane number tester

Kontaktéiert eis

Zesummenhang Product

Kontaktéiert eis

Wennt