ASTM D92 FDT-0101, Open cup flash point and fire point tester

The instrument conforms to ASTM D92, except for the determination of fuel oil and a flash point below 79 ℃ opening outside petroleum products and bitumen flash point and fire point.

चौकशीची

तपशील
स्पर्धात्मक फायदा

मूळ ठिकाण:	चांगशा, चीन
ब्रँड नाव:	मित्र
नमूना क्रमांक:	FDT-0102
प्रमाणपत्र:	CE, ISO, CO

किमान मागणी प्रमाण:	एक्सएनयूएमएक्स सेट
किंमत:	USD600-2000
पॅकेजिंग तपशील:	हार्ड कार्टन, मानक निर्यात पॅकिंग
वितरण वेळ:(अग्रणी)	30 दिवस
देयक अटी:	टी / टी, एल / सी
पुरवठा क्षमता:	50SET/महिना

अनुप्रयोग:
1. ASTM D92
2. Gasoline, lubricant oil, fuel oil testing
3. पेट्रोलियम, ऊर्जा, रसायन, संशोधन, गुणवत्ता नियंत्रण आणि विद्यापीठ

वैशिष्ट्य:

तांत्रिक बाबी
वीज पुरवठा	AC 220V ± 10%, 50Hz
The heating device	Quartz tube furnace heat, no fire, explosion, power 0~600W continuously adjustable.
Designated sweeping device	Automatic sweep program.

Designated sweeping device	Automatic sweep program.
थर्मामीटर	-6 ~ 400 ℃, division is 2 ℃
The relative humidity	≤85%.
हीटिंग दर	In line with standard;
प्रज्वलन	⑴ ignition sources: gas (or other civilian combustible gas, the same below); ⑵ spout aperture: 0.6~0.8 mm.
वातावरणीय तापमान:	-10 ℃ ~50 ℃.
एकूण वीज वापर	Less than 650W.
वैशिष्ट्य	1. using a special form of furnace, ensure the safety of trial; heating power continuously adjustable to meet the test requirements. 2. the instrument is designed for desktop structure, stainless steel countertops and stainless steel furnace shell, beautiful and generous. 3. the instrument is complete, users simply accompanied by gas or other civilian combustible gas can be tested. 4. covered with the flame is extinguished, in line with the requirements of ignition test.

सर्व श्रेणी

उत्पादने

संपर्क अमेरिका

ASTM D92 FDT-0101, Open cup flash point and fire point tester

आमच्याशी संपर्क साधा

संबंधित उत्पादन

आमच्याशी संपर्क साधा

संपर्कात रहाण्यासाठी