ASTM D5453 FDR-3301 פּעטראָלעום פּראָדוקט שוועבל אינהאַלט טעסטער (UV פלואָרעססענסע אופֿן)

UV fluorescence sulfur tester is based on UV fluorescence measurement principle and the development of computer technology combined with a new generation of precision instruments, is currently the most advanced of the total sulfur content tester, in line with ASTM D5453, SH / T 0689 and other standards, the instrument is National total sulfur content of refined oil arbitration standards. Now widely used in the determination of total sulfur content of crude oil, hydrocarbons and fuel, petroleum, plastics, petrochemicals, food and so on.

INQUIRY

באַשרייַבונג
קאַמפּעטיטיוו אַדוואַנטידזש

באַשרייַבונג:
Measurement principle instrument uses ultraviolet fluorescence method, when the sample is introduced into the pyrolysis furnace, cracking occurred sample oxidation of sulfide which quantitatively converted to sulfur dioxide, carried by a carrier gas, off which the water through a membrane dryer, into the reaction chamber, sulfur dioxide absorbing ultraviolet light energy into an excited state of sulfur dioxide (SO2 *), the fluorescence emission of sulfur dioxide when SO2 * to return to a stable state, the energy released by a photomultiplier tube to receive, and then the micro-current amplifier, computer data processing, the amount of reaction with sulfur dioxide emission intensity is proportional to the amount of sulfur dioxide and total sulfur content in the sample is proportional, so the content of the sample can be determined by measuring total sulfur emission intensity.

פּראָגראַמען:
1. ASTM D5453, SH / T 0689
2. פּעטראָלעום פּראָדוקטן
3. פּעטראָלעום, מאַכט, כעמישער, פאָרשונג, קוואַליטעט קאָנטראָל און אוניווערסיטעט

פּאַראַמעטערס:

טעכניש פּאַראַמעטערס
מאַכט צושטעלן	220-240 וו, 50/60 הז
מעסטן קייט:	0.2mg / L ~ 10000mg / L ~ percentage
Air source:	Argon: 99.999% Oxygen: 99.999%
Sample status:	Solid, liquid, gas (with corresponding injector)
טעמפּעראַטור קייט:	צימער טעמפּעראַטור ~ 1100 ℃ ± 3 ℃
Repeatability error:	0.2 מג / ל≤X <1.0mg / L ≤ ± 0.1 מג / ל 1.0 מג / ל≤X <10mg / L Cv≤קסנומקס% X≥10mg / L Cv≤5%

איינריכטונגען	1. Computer-controlled operation, enabling interactive, data, peak shape can be automatically stored print.
	2. The operating software can be connected with LIMIS system, automatic data transmission.
	3. The instrument uses the new quartz pyrolysis tube, the injection volume can be increased to reduce measurement errors, increase the sensitivity of the instrument, higher repeatability.
	4. Cooling fans, automatic switch, eliminating the need to wait for the shutdown to finish samples trouble, saving time and effort.
	5. Darkroom system uses the latest technology, the key components imported detecting element to improve the detection accuracy and sensitivity of the instrument.
	6. Equipment imported membrane dryer to absorb moisture, eliminating the need to frequently replace magnesium perchlorate of trouble, while reducing the leakage problem.
	7. Using computer control of temperature, improve the instrument precision temperature control, and difficult to over-temperature.
	8. Using air instead of water cooling, saving water resources.
	9. Can be adjusted to take existing calibration curve calibrated using a standard sample after sample analysis.

אַלע קאַטעגאָריעס

פּראָדוקטן

רוף אונז

ASTM D5453 FDR-3301 פּעטראָלעום פּראָדוקט שוועבל אינהאַלט טעסטער (UV פלואָרעססענסע אופֿן)

רוף אונז

ענלעכע פּראָדוקט

רוף אונז

באַקומען אין פאַרבינדן