ASTM D93 FDT-0201, Open cup flash point and fire point tester

סאָרט נעמען:

פריינד

מאָדעל נומער:

FDT-0201

Certification:

סע, יסאָ, קאָו

פּרייַז:

וסד 600-2000

פּאַקקאַגינג פרטים:

שווער קאַרטאַן, נאָרמאַל אַרויספירן פּאַקינג

עקספּרעס צייט: (לידינג)

קסנומקס טעג

צאָלונג תּנאָים:

ג / ה, ל / C

צושטעלן פיייקייַט:

50SET/MONTH

מאַכט צושטעלן

אַק 220 וו ± 10%, 50 הז

The heating device

Heating power from 0 ~ 600W continuously adjustable

Sample heating rate

1 ~ 12 ℃ / min, it can be controlled.

Electric mixing device

(1) 90 ~ 120 r / min for the test step A.

(2) 250 ± 10 rev / min for the test step B.

Standard oil cup

(1) Diameter: 50.7 ~ 50.8 mm.

(2) Depth: 55.7 ~ 56.0 mm.

(3) Test oil capacity groove depth: 33.9 ~ 34.3 mm.

(4) Test oil capacity: about 70 ml.

טערמאָמעטער

A bar mercury thermometer, in line with GB / T 261-2008 standards.

(1) temperature range -5 ~ 110 ℃, indexing 0.5 ℃.

(2) temperature range of 20 ~ 150 ℃, indexing 1.0 ℃.

(3) temperature range of 90 ~ 370 ℃, dividing 2 ℃.

יגניטיאָן

(1) ignition sources: gas (or other civilian combustible gas, the same below). (2) pilot aperture: 0.8 mm.

אַמביאַנט טעמפּעראַטור:

≤35 ℃.

קאָרעוו הומידיטי

≤85%.

גאַנץ מאַכט קאַנסאַמשאַן

ווייניקער ווי 650 וו.

שטריך

1. the instrument is designed in full compliance with ASTM D93, GB/T261 standards.

2. heating power continuously, stepless adjustable, voltmeter intuitive display power size, advanced, reasonable temperature control.

3. compact structure, stainless steel countertops, easy to clean oil.

4. easy to operate, the test results are accurate, the instrument was a number of measurement units selected as closed flash point detection equipment.